VOWTECH supplies and installs the cabinets that house your IT equipment — wall-mount network cabinets for small offices, floor-standing server racks for server rooms and open-frame racks for comms rooms — fitted with power distribution, cable management and airflow accessories, then dressed and labelled.
A rack is simple metalwork, yet it shapes everything placed inside it. The right cabinet holds servers, switches, patch panels and a UPS at standard spacing, keeps them locked away from passers-by, guides cool air through the equipment and gives cables a defined route. The wrong one ends up with doors that cannot close and a tangle nobody dares touch.
This page covers the enclosures themselves, not the computers that go in them — for those, see rack servers. VOWTECH helps you choose height, depth and style from a list of what must be housed now and what is likely to be added, then assembles, positions and secures the cabinet on site.
A rack is also where your structured cabling terminates, so the two jobs are frequently done together. When a whole room is being prepared, including power, cooling and access control, the rack work forms part of our server room setup service.
Three styles cover nearly every office, comms room and server room.
Compact lockable cabinets fixed to a wall, holding a patch panel, a switch or two, a router and perhaps a recorder. They keep network equipment off the floor in small offices, shops and floor distribution points.
Full-depth cabinets with perforated doors, adjustable mounting rails and castors or levelling feet. Built to carry servers, storage and UPS units and to pass cooling air from front to back.
Two-post or four-post frames without doors or sides. They offer easy access and good airflow for patching-heavy comms rooms where the room itself is already locked and clean.
A cabinet is only finished once the power, cable routes and labelling are in place.
We total the rack units, check the deepest device, weigh the load and allow spare space, then recommend a height, depth and style that will fit the room and the doorway.
Cabinets are assembled, levelled and fixed — wall cabinets on suitable anchors, floor racks positioned with clearance at the front and rear for service access and airflow.
Power distribution units are mounted vertically or horizontally and fed appropriately, so dual-supply equipment can draw from two separate sources.
Horizontal and vertical managers, brush panels and hook-and-loop ties keep patch leads short, routed and traceable, with power and data kept apart.
Blanking panels, fan trays and correct equipment orientation stop hot exhaust air recirculating to the front of the rack, which is a frequent cause of overheating.
Existing untidy cabinets are re-planned, re-patched and labelled in a scheduled window, with each connection recorded before it is moved.
A short, practical sequence that avoids buying a cabinet that turns out too shallow.
We list what will be housed, with sizes, weights, power needs and likely additions.
A cabinet type, size and accessory list is proposed, checked against the room and access route.
The rack is delivered, assembled, placed with service clearance and levelled or wall-fixed.
Equipment is mounted to a planned layout, then power and data cables are routed and tied.
Devices, ports and cables are labelled and a rack elevation drawing is handed over.
The benefits show up later — during a fault, an audit or an expansion.
Locked doors and side panels keep equipment away from curious hands, cleaners and accidental unplugging.
Managed front-to-back airflow helps servers and switches run within their intended temperature range.
Labelled, routed cables let an engineer trace a connection quickly instead of pulling leads to see what stops.
Planned spare units and power outlets mean new equipment slots in without a rebuild.
Complete rooms: layout, power, cooling, racks, cabling and access control.
Learn moreRack-mounted servers sized, supplied and configured for your workloads.
Learn moreCopper and fibre cabling terminated neatly into your racks.
Learn moreRack-mount and standalone UPS units to protect rack equipment.
Learn moreManaged and PoE switches supplied and configured for your network.
Learn moreNetwork build and support for offices and sites across the Emirates.
Learn moreSend us a list or a photo of the equipment to be housed. We will recommend the right cabinet and accessories and install it properly.
